10472 MURR MEF EMC-FILTER 1-PHASE 2-STAGE I:10A U:250 VAC/300 VDC snap on 100%NEW
10472 MURR MEF EMC-FILTER 1-PHASE 2-STAGE I:10A U:250 VAC/300 VDC snap on 100%NEW
常规价格
$122.00 USD
常规价格
$133.00 USD
促销价
$122.00 USD
单价
单价
无法加载取货服务可用情况
Description
Current: 10 A
DIN-rail mountable
Attenuation curves on request.
against symmetrical interferences
The single phase 2-stage EMC filters MEF 1/2 are used in the range 0.1...30 MHz to suppress cable carried interference on mains and control cables. The best filter performance is achieved by using short connection wires (suggestion: earth connection < 10 cm) and the largest possible diameter. The EMC filters work bi-directionally (in both directions). The filters are for demanding applications. The filters are designed for use with fixed modules. One step of the filter is always for the suppression of asymmetrical interferences (magnetically compensated suppression). The second step is, dependant on application for symmetrical or asymmetrical interferences.
DIN-rail mountable
Attenuation curves on request.
against symmetrical interferences
The single phase 2-stage EMC filters MEF 1/2 are used in the range 0.1...30 MHz to suppress cable carried interference on mains and control cables. The best filter performance is achieved by using short connection wires (suggestion: earth connection < 10 cm) and the largest possible diameter. The EMC filters work bi-directionally (in both directions). The filters are for demanding applications. The filters are designed for use with fixed modules. One step of the filter is always for the suppression of asymmetrical interferences (magnetically compensated suppression). The second step is, dependant on application for symmetrical or asymmetrical interferences.
Technical Data
GENERAL PRODUCT INFORMATION
| Suitable for application range | Devices with fast switching frequency and high repetition rate, Power Supply Units, before transformers, for frequency converters, in DC networks |
|---|---|
| Suitable for type of fault | asymmetrical interferences |
ELECTRICAL DATA
| Leakage current max. | 5 mA @ 250 V AC, 50 Hz |
|---|
ELECTRICAL DATA | SUPPLY
| Operating voltage AC max. | 250 V |
|---|---|
| Operating voltage DC max. | 300 V |
| Power frequency | 50 ... 60 Hz |
ELECTRICAL DATA | OUTPUT
| Overload current | 18× (IN t) max. 0.5 ms; 1.5× (IN t) max. 1 min. (1× per hour) |
|---|
INSTALLATION
| AWG number solid min. | 24 |
|---|---|
| AWG number solid max. | 9 |
| AWG number stranded/fine stranded min. | 24 |
| AWG number stranded/fine stranded max. | 11 |
| Connection cross-section solid min. | 0,2 mm² |
| Connection cross-section solid max. | 6 mm² |
| Connection cross-section stranded/fine-stranded min. | 0,2 mm² |
| Connection cross-section stranded/fine-stranded max. | 4 mm² |
DEVICE PROTECTION | ELECTRICAL
| Duration insulation test voltage | 2 s |
|---|---|
| Insulation test voltage L-L | 2,1 kV |
| Insulation test voltage L-N | 2,7 kV |
MECHANICAL DATA | MOUNTING DATA
| Mounting method | geschnappt |
|---|---|
| Suitable for mounting type | Mounting rail TH35, (EN 60715) |
| Height | 107 mm |
| Width | 56 mm |
| Depth | 39 mm |
ENVIRONMENTAL CHARACTERISTICS | CLIMATIC
| Climatic category (EN IEC 60068-1) | 25/085/21 |
|---|
Connection data
CONNECTION TYPE 1
| Connection | Screw terminals SK |
|---|---|
| Family construction form | terminal |
| Gender | female |
| Color contact carrier | green-yellow |
| No. of poles | 1 |
| PIN 1 | PE |
CONNECTION TYPE 2
| Connection | Screw terminals SK |
|---|---|
| Family construction form | terminal |
| Gender | female |
| Color contact carrier | gray |
| No. of poles | 2 |
| PIN 1 | L |
| PIN 2 | N |
CONNECTION TYPE 3
| Connection | Screw terminals SK |
|---|---|
| Family construction form | terminal |
| Gender | female |
| Color contact carrier | gray |
| No. of poles | 2 |
| PIN 1 | L' |
| PIN 2 | N' |
